To turn on the white light
Double click the ‘W’ button to activate the primary two white LEDs, the light is now operating in the lowest mode. To scroll through the modes press ‘W’ once. The mode selected will be indicated for two seconds on 'W' (see mode indicator below). After two seconds 'W' will indicate the amount of battery in the torch (see battery indicator below).
To turn off the white light
Press and hold the 'W' button for two seconds to turn off the light.
Locator buttons
The 'W' and ‘R’ will pulsate for 12 hours after operation making the light easier to find in the dark. ‘W’ will pulsate in GREEN and ‘R’ will pulsate in RED.
To activate flashing white light
The WHITE flashing mode can be activated from any of the primary WHITE constant modes. Press and hold the 'W' button for four seconds (approx. 4 seconds). Release button when flashing starts. To return to the low mode click the 'W' button once.
To activate SOS white light
From any mode: Press, release, press and hold either button for three seconds until S.O.S is activated.(approx. 3 seconds). To turn OFF hold down button 'W' for two seconds until S.O.S stops.
To turn on the red light
Double click the 'R' button to activate the secondary red LED, the light is now operating in the lowest mode. To scroll through the modes press ‘R’ once. The mode selected will be indicated for two seconds on 'R' (see mode indicator below). After two seconds 'R' will indicate the amount of battery in the torch (see battery indicator below).
To turn off the red light
Press and hold the 'R' button for two seconds to turn off the light.
Momentary switch
Press and hold either 'W' or ‘R’ button for instant light output. After holding for one minute the light will go out to prevent accidental prolonged activation. The light builds from a low output to maximum output in a stepped change over two seconds, preventing an accidental burst of bright light. This change also gives your eyes a second to become accustomed to the bright light.
Mode Indicator
Red (Low) – Amber (Medium) – Green (High)
Battery Indicator
Green 100% - 50%
Amber 50% - 25%
Red 25% - 5%
Red Flash 5% - 0% - at this point the output will drop to low mode giving approximately one hour of burntime
Important maintenance instructions